Due to variations over time and use of various manufacturers, product images shown are for illustration purposes only and may not be an exact representation of the product. We cannot guarantee the image you see will be an exact match to the product you receive.
Procurable
No reviews have been submitted for this product
Google's search results are incorrectly displaying free delivery and stock statuses. While we working hard to resolve ASAP, in the meanwhile, Please check the stock status on your item before completing your purchase and note that shipping is calculated at checkout. We apologize for this temporary inconvenience.
SVU Replacement Lift Cables
BH-7794-14 Left-Front Cable 376" Long like Wheeltronics 2-0539 Equalizing Cable
Left Front Cable for Wheeltronic 4-Post Lift Models 12000 Series
Description Details:
Overall Length: 31’ 4” (376 in / 9550.40 mm) Long
Cable Diameter: 9/16” (14.288 mm)
Cable Material: Galvanized Steel
Cable End #1: (1) Threaded Stud 7/8″-14
Cable End #2: (1) Button Stop 1”
Fastener Included
For the Left Rear (LR) Cable Assembly, see BH-7794-15 (Ref # 2-0540).
For the Right Rear (RR) Cable Assembly, see BH-7794-16 (Ref # 2-0541).
For the Right Front (RF) Cable Assembly, see BH-7794-17 (Ref # 2-0542).
Content Listing:
(1) Wire Rope Cable Assembly
Safety First: Replace Auto Lift Cables at First Sign of Wear
All wire rope cables generally wear both from the inside and outside. Inside wear is much less significant and is caused as the cables are pulled across the cable pulleys or sheaves. This wear is caused by what is termed nicking and can appear on internal strands with an almost scalloped look. External wear on cables is much more apparent and is essentially abrasive wear. Abrasive wear is the result of metal being slowly worn away or removed over time. This appears on the crowns of each wire with a flattening of the wire appearance. As the wires flatten, material is being lost. Since the strength of the cable continues to lessen, the cable becomes weaker. Additionally, almost everyone at some point has seen frayed rope. This is a condition where unraveling, worn, or separated strands become evident. If this is observed to be happening on any wire rope cable assembly, immediately cease use of the equipment with this type of worn cable and replace the cable as well as the sheaves or pulleys immediately.
As a rule, if you own an auto lift or anything that uses wire rope cables, you should at a minimum conduct a monthly visual inspection of the cables and sheaves or pulleys. This is especially important if your cable-driven equipment is frequently used. If you are starting to witness the small round strands comprising each cable assembly starting to flatten and then even flatter, it is time to consider replacing the affected cables. Most cables on auto lifts or even any equipment including winches are easy to replace and the costs are relatively minimal. If you do not wish to replace the cable assembly yourself, there are many companies that specialize in auto lift installation and service that can help you.
Uses: Auto Lifts, Car Lifts, Light Truck Lifts, Vehicle Lifts, Van Lifts, Bus Lifts
***Due to variations in the lifts over time, the part number depicted in your diagram may not be accurate. To verify the part before purchase, please contact us with Model Number & Serial Number of you lift. Please verify the length of the runways, measured from the inside of one column to the inside of the other column on the same side
There aren't any reviews for this product.