5-102739 Corghi DOUBLE PEDAL VALVE | Replaces 900253298 and 900228473

Corghi Tire Changers Replacement Parts

Dual Pedal Valve Assembly

Corghi OEM: 900253298

Here is how it works;

The double pedal valve has two pneumatic circuits

• Bead Breaker control (RIGHT SIDE)
  
  • Normally in a phase that pushes the bead breaker pull-rod out to allow for the free movement of the bead breaker shovel.
  • When the pedal is depressed, the formerly energized side of the cylinder exhausts, and the normally exhausted side of the cylinder energizes to pull the side shovel to the machine.
• Turntable control (LEFT SIDE)
  
  • Normally in the last positioned phase, allowing no air flow or turntable cylinder movement. It is either in the JAWS OUT phase or the JAWS IN phase.
  • When the pedal is depressed, a positioning bar drops through a special cog, and starts into the next position phase. When the pedal is released, the positioning bar follows the path of the cog through to the next phase final position and rests there
  • In phase 1, the cylinder is energized on one side, the other side of the cylinder is exhausted. The turntable moves until the end of the stroke is achieved(or pressure is applied to the wheel), and then stops.
  • In phase 2, the cylinder is exhausted on one side, the other side of the cylinder is energized. The turntable moves until the end of the stroke is achieved(or pressure is applied to the wheel), and then stops.
  • No matter what phase you are in, only one side of the cylinder is energized, but there is ALWAYS pressure on one side of the cylinder.

When the turntable seals are leaking, they typically will leak in only one position, but this is not always true because there are so many variable to consider. For instance, there may be two cylinders instead of just one, and they may leak in opposite directions, or rarely, in both directions.

Seal failure can happen even on new seals if proper lubrication is not maintained. Your in-line oiler must be kept over half full, primed and adjusted. A seal leak can sometimes be remedied by an introduction of oil(maybe more than normal), or by a light grease on the cylinder walls, followed up with regular lubrication through your oiler.

Repairs Corghi Models:

• A9824  
• A2019 
• A2024
• MTS20
• MTS40 and more

**This is a Special Order Item - Not Eligible for Returns, Refunds or Exchanges - All Sales Final**

Note on Stock Status: Available means item has historically been available from the manufacture to be Drop Shipped. Available as a stock status does not mean item is in stock and ready to ship. Please call ahead to check availability.