The R10 features 3-stage front arms and 2-stage rear arms - greater access to vehicle pickup points!

The Revolution Lift R10 is a no nonsense straightforward two post lift that’s engineering surpasses that of other comparable lifts.  A garage or small shop with the R10 will get a 10,000-pound lift that’s affordable and dependable.  This is a symmetrical lift, which means you’ll be able to drive through with plenty of clearance.  The multiple stage arms give you additional options for vehicle pickup points. 

Hydraulic cylinders are housed in column from above and pull the arm carriage upward.  This means the cylinders are always protected from the grit and grime that could possibly make their way into this area.  Cables are there for equalization, they provide no load bearing, it’s the cylinders and locks within the column that do all the heavy work with this lift.

Features:

• Full stroke hydraulic cylinders in each column
• Top mounted pull design cylinder protects piston inside of carriage
• Overhead cable for equalization
• Spring operated arm restraints, disengage at floor level
• Padded overhead switch bar
• Single point lock release
• ALI Gold Certified Lift

INCLUDED WITH THE R10:

• SET OF (4) 3 ½” ADAPTER EXTENSIONS
• SET OF (4) 5” ADAPTER EXTENSIONS
• (1) COLUMN STORAGE BRACKET

SPECS

• MODEL: R10 (3-Stage front, 2-Stage rear arms)
• MAXIMUM RISE: 71 1/8”, 76 1/8” (with 5” extension)
• OVERALL HEIGHT: 143”
• OVERALL WIDTH: 131”
• DRIVE THROUGH CLEARANCE: 99”
• OVERHEAD SWITCH HEIGHT: 137 ¼”
• FRONT REACH (MIN/MAX): 24 ½” / 44 3/8”
• REAR REACH (MIN/MAX): 36” / 58”
• MIN/MAX ADAPTER HEIGHT: 3 5/8” W/NO ADAPTER / 8 5/8” W/5” ADAPTER
• WIDTH INSIDE COLUMN: 109”
• VOLTAGE/AMPS: 208/230, 15 amps; 208/230, 16 amps
• MOTOR/PHASE: 1ph/2HP/50Hz, 1ph/2HP/60Hz
• CEILING HEIGHT REQUIRED: 144”
•