SVI BH-7008-86 Rhino Power Unit 1.5hp 110V 3520RPM

Rhino 2HP 100V AC Hydraulic power unit with power up and gravity down functions for above ground vehicle lifts. A push button raises the lift and a manual control allows for controlled lowering. This unit features an installer adjustable pressure relief valve and 1.5 GAL opaque tank. 

Power Unit: 1.5 HP,    1 PH,   3520 RPM,   3 GPM  

Buffer Valve: M14 x 15

Pressure Relief Valve: Adjustable and factory preset to 2500 PSI

Check Valve: M20 x 1.5

Motor: 115/208-230V,  1 PH,  60 HZ,  2 HP

Gear Pump: 1.2cc/r

Suction Filter: 100 mesh

Tank: 1.5 Gallon, Usable, Opaque plastic

Replacement parts list:

BH-7008-51A      1.5 HP Motor, 115/208-230V 1PH, 3520 RPM

BH-7008-52        Manual Release Valve

BH-7008-53         Check Valve

BH-7008-54A      Pump Body / Center Manifold AC2500

BH-7008-55A     Pressure Release Valve  AC2500LR110

BH-7008-56       Plug M10 x 1

BH-7008-57        Plug 9/16 - 18

BH-7008-58       O-Ring 8mm x 2.1mm

BH-7008-59       O-Ring 11.8mm x 1.8mm 

BH-7008-60A     Gear Pump Assembly AC2500LR110 

BH-7008-61      Manifold Screw

BH-7008-62      Motor Shaft Coupling

BH-7008-63A    Pump Mounting Bolt AC2500LR110

BH-7008-64A    Suction Pipe AC2500LR110

BH-7008-65A    Return Tube AC2500LR110

BH-7008-66A    O-Ring 120mm x 5.7mm AC2500LR110

BH-7008-67A    1.5 Gallon Reservoir  AC2500LR110

BH-7008-68A   Hex Screw M5 x 18 AC2500LR110

BH-7008-69      Flat Washer M5

BH-7008-70A   Buffer Valve AC2500LR110

BH-7008-71     3/8" NPT Plug

BH-7008-72      Ball Plug

BH-7008-73      Suction Tube Strainer

BH-7008-74     Lock Washer M8

BH-7008-75     Switch Cover

BH-7008-77    Switch Box Cover Plate 

BH-7004-19    Motor Switch Push To Raise

BH-7008-76    Switch Protection Support