SVI BH-7236-02 Hydraulic Cylinder 992317

Hyd Cylinder 7000/9000 Asym.

SVI Part #: BH-7236-02

Ref# 992317

FOR: Forward

Cylinder Removal Procedure

1) With lift in the fully lowered position raise lift to first locking position.

2) Lower lift too first locking position

3) Remove 1 1/8” cylinder jam nut and retaining nut from the bottom of the carriage.

4) Cut and remove plastic hose ties from cylinder.

5) Disconnect hydraulic hose from elbow at cylinder

6) Cap off cylinder elbow with 9/16 JIC cap and Hose with 9/16 JIC plug.

7) Remove nut and bolt from overhead side of cylinder * Note when this bolt is removed, nothing will be holding the cylinder*

8) Remove hydraulic cylinder from column.

Cylinder Reinstallation

1) Inspect cylinder to insure C-clip is installed at rod end of cylinder

2) Place cylinder in column and reinstall overhead cylinder bolt and nut.

3) Manually pull chrome plunger rod down into the carriage placing the threaded end into hole at the base of the carriage.

4) Reinstall 1 1/8 cylinder retaining nut and jam nut on cylinder rod at underside of the carriage.

5) Raise lift off locks using lifts power unit.

6) Lower lift to floor level

7) Check hydraulic oil level at power unit reservoir and add fluid as needed.

8) Cycle lift several times to bleed air from lift cylinders

9) With lift in lowered position, check oil level and add fluid as needed.

Warranty Notice:

To ensure warranty consideration for this product, you must comply with these instructions. Before installing this cylinder, the ENTIRE hydraulic system must be flushed and replaced with CLEAN fluid. 

All returned cylinders will be disassembled and inspected. Any cylinder being purchased for use in an in-ground cassette style lift carries not warranty. Ince installed all sales are final and no returns will be accepted, regardless of reason

**This is a Special Order Item - Not Eligible for Returns, Refunds or Exchanges - All Sales Final**

Please Note Inventory Level Status - Does not denote item is in stock. Class A items generally ship direct from the manufacturer. Class A items generally have a 3 business day lead time from the date of order before it will be ready to ship.SVI parts are not all guaranteed available, even if a part number is listed. Drop shipping charges may include a handling charge in addition to your order total. SVI part numbers MAY be substituted with OEM or off the shelf parts. Please feel free to contact us to verify stock and availability before placing an order.