Due to variations over time and use of various manufacturers, product images shown are for illustration purposes only and may not be an exact representation of the product. We cannot guarantee the image you see will be an exact match to the product you receive.
While They Last - Obsolete!!!
No reviews have been submitted for this product
Google's search results are incorrectly displaying free delivery and stock statuses. While we working hard to resolve ASAP, in the meanwhile, Please check the stock status on your item before completing your purchase and note that shipping is calculated at checkout. We apologize for this temporary inconvenience.
The air distributor is the plastic ring with many many holes all around it, having a three stepped body, that sits in the bottom half of the motor case and seats up against the Rotor.
ORIGINAL FACTORY DEPTH of the OVAL holes is 4.65mm (3/16")(0.1845") . Discard depth varies on the condition of your rotor, but 1mm is certainly a point of failure that we have seen often.
O-ring replacement may be recommended;
This is a wear item, and has a high rate of failure in a high volume shop. It is a likely part for replacement if the motor is still smooth, but very slow. Other symptoms can also point to this part as having failed.
If you have troubles with your arm movement;It is likely stuck together at the arms because the machine has naturally worn down the air distributor inside the motor.
If you find all the circumstances point to the distributor needs to be replaced, check the rotor, and pistons prior to placing the order. The pistons and rotor can crack, allowing an air leak that makes the pistons fire late, causing a knock, or growl. The top of the rotor is bolted to the crank, and can loosen, causing damage to the rotor,These bolts need to checked for tightness, and the condition of the plastic gusseting on the rotor.
Installation needs to include indexing the installation position. Indexing the distributor onto the case pins is critical for operation, and must be done correctly. There are two different positions that indexing could be done from a logical assumption, but needs to be done as the illustration below directs;
As with all air operated devices, we recommend periodically checking to make sure your lubricator/oiler is functioning and full of oil. By doing this, it will help prevent premature part failure.
**********************Be sure to also see.......**************************************************
RB-6 Bead Breaker Roller Plate from QSP
No more lifting the tire to rotate to the next position to break down the tire bead. Just roll the tire, and no lifting required. Better than the Hoffman and Snap-On EAA0304G51A
Th RB-6 Bead Roller plate can either bolt down to the floor, or rest on rubber pads.
There aren't any reviews for this product.